Licensed electrician EC9715
Electric oven installation Perth — wall, built-in & freestanding
New oven going in? Andrew handles everything — disconnect the old, connect the new, test and go. Supply and install available. No gas, electric only.
What Andrew installs
Supply & install
Andrew sources a quality oven suited to your kitchen and budget, delivers it, and installs it the same day. No trips to the shop, no guessing on specs.
Install your oven
Already bought one? Andrew will install your new oven safely and to manufacturer spec. Just have the oven on-site when he arrives.
Like-for-like replacement
Replacing a dead oven with the same model or footprint. Quickest job on the books — usually under an hour.
New circuit + socket
No 16A dedicated circuit behind the wall? Andrew runs one. Fully licensed mains electrical work. Perth metro.
Wall, built-in and freestanding ovens
Andrew installs every type of electric oven across Perth:
- Wall ovens (built-in) — the oven set at eye level in a tall cabinet, or under the bench. Andrew slides the old one out, disconnects it, then wires and fits the new one into the same cabinet opening.
- Built-in under-bench ovens — the standard oven that sits under your cooktop in the kitchen cabinetry. Fitted, levelled and secured so it sits flush.
- Freestanding ovens and upright cookers — the all-in-one oven-and-cooktop unit. Andrew connects it, checks it's sitting level, and tests every function.
Searching ‘wall oven installation near me’? Andrew covers the whole Perth metro. Call, or send a photo of your old oven and the space, and he'll confirm the price. Electric ovens only.
Andrew can source the oven for you
Not sure which oven to buy? Tell Andrew your cavity size, budget, and preferred brand. He'll recommend the right model, source it at trade price, and install it on the same visit — no extra trips to the store.
Installation pricing
Andrew confirms the exact price before he starts — no surprises.
| Job type | Price |
|---|---|
| Like-for-like swap | From $250 |
| Install your oven | From $250 |
| Supply & install | From $800 |
| New circuit + socket | Quote on request |
Electric ovens only. Prices may vary for complex cavities or remote suburbs.
What's included
- Disconnecting and removing your old oven from the cabinet (old-oven takeaway on request)
- Wiring and connecting the new oven to your existing 16-amp oven circuit
- Levelling and securing it into the cabinet or cavity
- A full function and full-load test before he leaves
- Upfront pricing confirmed before he starts, and a 12-month parts warranty
Oven installation and removal across Perth
Andrew handles the whole job, not just the new oven going in. Old oven removal and installation are done in the one visit — he disconnects and removes your old unit, then installs the replacement, levels it and secures it into the cabinet. As a licensed electrician (EC9715), he can also sort the wiring side if your old oven was hard-wired and your new one needs a 16A circuit and socket.
Whether it's a like-for-like swap or a brand-new oven going into an existing kitchen, the process is the same: assess the cavity, disconnect safely, fit the new oven, test it on full load, and take the old one away on request. From Joondalup down to Mandurah, Fremantle to Midland, Andrew installs across the Perth metro.
How much does it cost to install an oven in Perth?
Oven installation pricing depends on what's already behind the wall. A straight like-for-like replacement into an existing 16A circuit and same-size cavity starts from $250. If you supply your own oven, an install starts from $250 as well. Prefer Andrew to source the oven for you? Supply and install starts from $800 depending on the model. If there's no existing 16A outlet and a new circuit and socket are needed, that's quoted on request after a look at the job.
Every quote is upfront — you'll know the cost of the new oven and installation before Andrew starts. Prices may vary for complex cavities or outer suburbs. Get a fast quote through the form above.
Installing an oven in a cabinet — fitting it properly
Most Perth kitchens have the oven built into a cabinet, either under the bench or in a tall wall unit. Dropping a new oven into that space isn't just plug-and-go:
- Andrew checks the cavity size and ventilation against your new oven before he starts.
- The old oven is disconnected and slid out; the new one is wired in, pushed home, levelled and secured to the cabinet so it doesn't move.
- Everything runs off a dedicated 16-amp circuit and socket. If your kitchen doesn't have one, Andrew can install it (licensed EC9715 electrical work).
- Once it's in, Andrew runs it up to temperature and tests it under load before he leaves.
Electric ovens only. If the cabinet needs trimming or the cavity doesn't match, Andrew will tell you the price before any work starts.
Electric and dual-fuel ovens
Andrew installs and repairs electric ovens, electric cooktops, and the electric oven side of gas-combination (dual-fuel) units — a gas cooktop paired with an electric oven. For the gas connection on a dual-fuel appliance you'll still need a licensed gas fitter; Andrew handles the electric oven installation. He does not install pure-gas ovens.
Electric ovens only
Andrew installs and repairs electric ovens, cooktops, and the electric parts of dual-fuel ovens. For gas connections you'll need a licensed gas fitter.
“Very professional. Diagnosed the fault straight away and had the part on the van. Installed my new oven in under an hour. 5 stars.”
Book an installation
Tell Andrew what you need. He'll confirm availability and price.
Get a quote
Common questions
Contact Andrew Today.
Servicing All Suburbs In Perth WA